manualshive.com logo in svg

Hitachi C 18DL, Technical Data And Service Manual, Page: 21 / 28

Share
Download
Hitachi C 18DL Technical Data And Service Manual Download Page 21

--- 18 ---

(5) Tightening torque of each screw is given below.

Machine screw of the Switch (1P Screw Type) W/O Lock 

[53] ...

 0.4    0.1 N

•

m (4    1 kgf-cm, 3.5    0.9 in-lbs.)

Special Bolt M5 

[26] .............................................................

1.0    0.2 N

•

m (10    2 kgf-cm, 8.7    1.7 in-lbs.)

Tapping Screw (W/Flange) D4 x 16 (Black) 

[47] ..................

2.0    0.5 N

•

m (20    5 kgf-cm, 17.4    4.3 in-lbs.)

Tapping Screw D4 x 10 

[29] .................................................

2.0    0.5 N

•

m (20    5 kgf-cm, 17.4    4.3 in-lbs.)

Seal Lock Flat Hd. Screw M5 x 12 

[11] ................................

3.4    0.7 N

•

m (35    7 kgf-cm, 30.4    6.1 in-lbs.)

Seal Lock Flat Hd. Screw M3 x 12 

[6] ..................................

0.8    0.2 N

•

m (8    2 kgf-cm, 6.9    1.7 in-lbs.)

Nylock Bolt (W/Flange) M4 x 12 

[22] ....................................

2.5    0.5 N

•

m (25    5 kgf-cm, 22    4.3 in-lbs.)

9-2. Precautions in Disassembly and Reassembly of Battery Charger

Refer to the Technical Data and Service Manual of the Model UC 18YRL Charger for precautions in disassembly

and reassembly of this charger.

Summary of Contents for C 18DL





























Reviews:

No comments