background image

24

 

The washing machine is heavy. Use caution when lifting it.

 

When lifting the washing machine, do not hold the jog dial or the 
detergent dispenser casing. Lift the washing machine with two persons 
holding the bottom and the back of the washing machine.

 

Frozen hoses may tear/burst. Do not install the washing machine in 
areas where there is a risk of freezing, or outdoors.

 

If the power supply plug is damaged, in order to avoid hazard, it 
must only be replaced by an authorized service agent or repair shop 
appointed by the manufacturer.

 

Make sure to earth the unit. Failure to earth the unit may cause electric 
shock if an electric leak takes place.

W:600 mm

H:850 mm
(*820 mm)

D:584 mm
D:560 mm

(*Height without worktop for under-counter installation)

 

Install the appliance on a 

fl

 at hard 

fl

 oor to avoid excessive vibration and 

noise.

 

Do not install the unit in humid places such as a bathroom or places 
that are exposed to wind and rain.

 

Keep the minimum installation distance from the walls to prevent 
abnormal sound and vibration.

(Side)
At least 3 mm

(Back)
At least 3 mm

(Side)
At least 3 mm

How to Install the Washing Machine

 Safety 

Instructions

 Dimensions

 Where to install 

the washing 

machine

 

 

3WPL090151.indd   24

3WPL090151.indd   24

3/3/2014   3:27:44 PM

3/3/2014   3:27:44 PM

Summary of Contents for BD-W75TV

































Reviews: