background image

3WPL073551-1

26

27

How to Install the Washing Machine

 

Connect the washing machine to an alternating current via a correctly 

installed earthed socket only.

 

The mains voltage must correspond to the voltage specification on the 

washing machine.

 

Connection specifications as well as the required fuses are stipulated 

on the washing machine nameplate.

 

Do not plug the washing machine into an extension lead or power strip 

with multiple sockets.

 

All four adjustable feet must be firmly on the ground. The washing 

machine must not wobble.

 

Check the alignment of the washing machine with a spirit level, and 

adjust the feet if it’s not aligned.

Loosening 

1

Adjustable leg

Elevating

Lock nut

Loosen the lock nut by 

unscrewing in the arrow 

direction 

1

 then stabilize 

the unit with the adjustable 

feet.

Lock nut

Tightening 

2

After adjustment, tighten 

the lock nut by screwing it 

in the arrow direction 

2

.

Plastic base plate

Tighten the lock nut until it 

reaches the plastic base plate.

Adjustable leg is not over 25 mm.

How to Install the Washing Machine

 

You need a space of 600 mm (W) x 560 mm (D) x 850 mm (H) with at 

least 3 mm of clearance on the sides, above and back.

 

If the height of the space ranges from 823 mm to 852 mm, remove the 

worktop and install an upper plate on top of the washing machine (sold 

separately).

Upper Plate :

Part No. BD-W80MV 150 

Please contact your local dealer when 

installing the upper plate.

Necessary clearance :

(Sides) At least 3 mm

(Back) At least 3 mm

(Above) At least 3 mm

 

For neater installation under the counter, check the height of internal 

measurement before fitting and adjust to the appropriate height with the 

adjustable feet.

 

Æ

Page 26 : How to Install the Washing Machine (Level Adjustment).

 Under-counter 

installation

Summary of Contents for BD-W70MSP

































Reviews: