Manually Setting the Time
1. During Standby mode, press and hold (tap and hold) MEMORY on the unit. The hour
digits flash on the display.
2. Press (tap)
to adjust the hour digits, and then press (tap) MEMORY to confirm.
The minute digits will flash on the display.
3. Press (tap)
to adjust the minute digits, and then press (tap) MEMORY to
confirm.
4. The time is now set.
Settings the Daily Timer
1. Press and hold TiMER on the remote control until the display shows “On Timer”, and the
hour digits flash.
2. Press (tap)
to adjust the hour digits, and then press TiMER to confirm. The
minute digits will flash on the display.
3. Press (tap)
to adjust the minute digits, and then press TiMER to confirm.
4. When On Timer Clock set, the display will show “Off Timer” and the hour digits will flash.
5. Press (tap)
to adjust the hour digits, and then press TiMER to confirm. The
minute digits will flash on the display.
6. Press (tap)
on the remote control to adjust the minute digits, and then press
TiMER to confirm.
7. Finally Press (tap)
to select DAB, FM, CD, USB or CARD mode, then press TiMER
to confirm. The display will show “VOL#” and flash. Press(tap)
to adjust the
volume, and then press TiMER to confirm. “ ” icon will show on the display to indicator
the timer is on.
8. The Timer setting is now complete.
To Cancel the Daily Timer
Press TiMER on the remote control repeatedly to select Timer Off mode. The “ ” indicator
will disappear from the display.
Setting the Sleep Timer
Use the sleep timer to turn the system off after a certain number of minutes in play mode.
By setting the sleep timer, you can fall asleep to music and know that your system will turn
off by itself rather than play all night.
1. To set the sleep timer press SLEEP on the remote control repeatedly to view the
different timer settings. The number of minutes shown will display in this sequence:
SLEEP 90
SLEEP 80
SLEEP OFF
SLEEP 10
SLEEP 20
SLEEP 30
SLEEP 40
SLEEP 70
SLEEP 60
SLEEP 50
2. The system is now set to turn off after the number of minutes you have set. The
display will show “SLEEP #”, e.g. “SLEEP 10” means the unit will switch itself off after 10
minutes, “SLEEP 20” means the unit will switch itself off after 20 minutes, and so on.
GB
19
AXM1204E-WE_IB_01GB_RC_130812_Zell.indd 19
12/8/13 3:33 PM
