Hitachi AXF100E, Service Manual

Page: 4 / 33

AX-F100
– 3 –
SAFETY PRECAUTIONS
The following precautions should be observed when servicing.
1. Since many parts in the unit have special safety-related characteristics, always use genuine Hitachi’s replacement
parts. Especially critical parts in the power circuit block should not be replaced with other makers. Critical parts
are marked with in the circuit diagram.
2. Before returning a repaired unit to the customer, the service technician must thoroughly test the unit to ascertain
that it is completely safe to operate without danger of electrical shock.
SPECIFICATIONS
• SPECIFICATIONS
•
RECEIVER SECTION
Tuner Range : FM: 87.5 - 108.0 MHz (0.1 MHz step) – UC
: FM: 87.50 - 108.00 MHz (0.05 MHz step) – E, EBS, W, WUN
: MW: 520 - 1,710 kHz (10 kHz step) – UC, W, WUN
: MW: 522 - 1,611 kHz (9 kHz step) – E, EBS, W, WUN
: LW: 153 - 281 kHz (1 kHz step) – E, EBS
•
CD SECTION
Sampling Frequency : 44.1 kHz
Laser : Semiconductor laser
•
TIMER SECTION
System : Digital Quartz Clock
Display Format : 24-hour cycle – E, EBS, W, WUN
12-hour cycle – UC
Timer Accuracy : Within 60 seconds at monthly rate in normal room temperature
•
GENERAL SPECIFICATIONS
Power Supply : AC 110 - 127 V/220 - 240 V, 50/60 Hz – W, WUN
: AC 120 V, 60 Hz – UC
: AC 230 V, 50 Hz – E, EBS
Power Consumption : 48 W (ECO-ON mode: less than 1 W) – E, EBS, W, WUN
: 1.1 A include AC outlet (ECO-ON mode: less than 1 W) – UC
Rated Output Power : 30 W + 30 W (6 ohms, THD 10%)
Inputs/Outputs : MD, TAPE, AUX, Optical Digital Out, Pre out, Headphone, System Connector
•
SPEAKER SECTION
System : 2 Way Bass Reflex Speaker System
Speaker Unit : Woofer: 10 cm
∞
1, Tweeter: 5 cm
∞
1
Impedance : 6 ohms
•
DIMENSIONS
HCU-R30 Unit : 210 (W)
∞
120 (H)
∞
325 (D) mm
Speaker Unit : 150 (W)
∞
275 (H)
∞
227 (D) mm
•
W E I G H T
HCU-R30 Unit : 4.4 kg
Speaker Unit : 3.0 kg (1 speaker)
•
ACCESSORY SUPPLIED
: FM Antenna, AM LOOP Antenna,
Remote Control (RB-AXF3), Battery,
Edison plug adapter (For W, WUN only)
*
Specifications are subject to change for performance improvement without notice.