Hitachi AX-M76, Instruction Manual, Page: 15 / 18

- 14 -
Setting the Clock Manually
The built-in clock shows the time on the display.
1. In standby mode, press the clock button (
CLOCK
) twice, the VFD will display SET CLOCK and the
hour indicator will blink.
2. Set the hour with the
VOL-
or
VOL+
button.
3. Press the clock button (
CLOCK
), minute indicator will blink.
4. Set the minute with the
VOL-
or
VOL+
button.
5. Press the clock button (
CLOCK
), the built-in clock starts operating.
Caution:
* The operating time of every step shouldn’t be longer than 10 seconds or it will return to the time
display.
* If there is a power failure or the systems power is turned off, the clock will lose its setting.
Setting the Sleep Timer
Use the sleep timer to turn the system off after a certain number of minutes when in play mode. By
setting the sleep timer, you can fall asleep to music and know that your system will turn off by itself
rather than play all night.
1. Play a CD or tune in to the desired station.
2. To set the sleep timer press the sleep/timer button (
SLEEP/TIMER
) on the remote control repeatedly,
it changes the number of minutes shown on the display in this sequence:
After setting the number of minutes for the sleep timer, the display will return to the display as
before setting the sleep timer.
The system is now set to turn off after the number of minutes you set. The display will show
“z
z
z
”.
To confirm the sleep time
When the sleep/timer button (
SLEEP/TIMER
) on the remote control is pressed once, the remaining
sleep time is displayed. Wait for a second until the display returns to the original display.
To cancel the sleep timer setting
Repeatedly press the sleep/timer button (
SLEEP/TIMER
) on the remote control until the “00” is displayed.
Turning off the system also cancels the sleep timer.
- -
10 20
...
80 90 00
ＨＩＴＡＣＨＩ（ＡＸ－Ｍ７６）－ＷＤ１２Ａ－ｖ２．ｐ６５ 2008-7-24, 17:03 14