GB-12
CLOCK SETTING (IN STANDBY MODE)
•
All the time information is shown in either 12h or 24h foramt.
1.
Pressing and holding the MEMORY / TIME SET button for some seconds will access the time format
change mode.
2.
Press TUNING / SKIP / button to select 12h or 24h format.
3.
Press MEMORY / TIME SET button. hour digit will flash.
Press TUNING / SKIP (Forward) (Backward) button to set the hour.
4.
Press MEMORY / TIME SET button. minute digit will flash.
Press TUNING / SKIP (Forward) (Backward) button to set the minute.
5.
Press MEMORY / TIME SET button once more, flashing stops and the time is set.
SETTING THE TIMER
•
The system can switch on to TUNER or CD mode automatically at a preset time. It can serve as an alarm
to wake you up.
After one hour from the preset time, the system will return to the standby mode.
•
Before setting the timer, make sure the clock is set correctly.
Timer setting
1.
Press and hold TIMER button a few seconds.
– Hour digit will flash, press or button to set the hour.
2.
Press TIMER button again, minute digit will flash, press or button to set the minute.
3.
Press TIMER button to store the start time.
4.
Repeat the step 1 to 3 store the off time.
5.
Press TIMER button again, “TUNER” digit will flash, press or button to select TUNER or CD
mode.
6.
Press TIMER button again, “VOLUME” digit will flash, press or button to adjust volume.
7.
Press TIMER button again to store the times setting..
8.
Press power to turn the unit off.
The TIMER flag is lighting up now.
To stop the TIMER
•
Press TIMER and the TIMER symbol will disappear from the display.
– The timer is now switched off.
Sleep setting
This timer turns power to your system off at the set time.
•
When enjoying the desired source, press SLEEP to select the desired time.
•
Each time you press the button; it changes the number of minutes shown on the display in this sequence:
•
To cancel the sleep timer, press the SLEEP button once and ìSLEEPî will go out in the display.
90 80 70
.......
OFF
MX-MP338 HITACHI MANUAL
24/5/05, 10:42
12
