ENGLISH
4
When the symbol “
bo
” is flashing, rotate the setting ring until
the “
Co
” symbol is shown.
5
Briefly touch the left touch zone to send the binding signal,
at which point the symbol
will flash several times.
6
If binding has been successful the number indicates the
signal strength (1 = min to 5 = max). If binding fails,
appears
on screen. Please try again.
Successful binding
Failed binding
7
The red LED on the Heat pump relay will turn off when
binding has been successful.
?
N O T E
Binding can be cancelled from the binding screen by touching and holding
on the left touch zone for approximately 10 seconds.
4 REPLACEMENT OF THE BATTERIES
1
Pull to remove the dial ring.
2
Detach the thermostat from the base.
3
Replace the batteries as shown below.
4
Attach the thermostat to the base.
5
Place the dial ring.
REPLACEMENT OF THE BATTERIES
PMML0410A rev.0 - 03/2016
5
