9
Operating
The PbyP / PinP is a function for displaying two different picture signals on a
screen that is separated into main and sub areas for each signal.
PbyP (Picture by Picture) / PinP (Picture in Picture)
PbyP
button
Normal mode
PbyP mode
main
area
sub
area
PinP mode
Press the
PbyP
button on the remote control. This acctivates the PbyP mode.
Then, press the
PbyP
button again. The projector goes into PinP mode. The
screen displayed before the
PbyP
button was pressed will be displayed as the
main area. Most of operations are effective for the main area only. Only outputs
the audio input signal paired with the picture input signal for the main area.
To quit the PinP mode, press the
PbyP
button again.
ð
ð
main
area
sub area
PbyP button
Remote control
