Once the TV has found all your local stations, they are then automatically
assigned a programme number and name, if available from the broadcast.
important note.
start A.P.S. (Auto Programming System)
•
When the TV is operated for the first time, installation wizard will guide you
through the process. First, language selection screen will be displayed.
• Use "up" or "down" buttons to select your language and press OK button
to set selected language and continue.
• After selecting the language, “
First Time Installation
” screen will be
displayed, requiring you to set Country, Search Type, Teletext
Language
and Scan Encrypted options.
• By pressing "left" or "right" button, select the country you want to set press
"down" button to highlight Search Type option. Use Left or Right button to
set the desired Search Type. Available search types are digital only,
analog
ue
TV only and full. When set, press Down button to highlight
Teletext Language.
Use "left" or "right" button to select desired Teletext
Language.
• Press "down" button after setting Teletext Language option. Scan
Encrypted
Channels
will be then highlighted. You can set Scan Encrypted
Channels
as Yes if you want to scan coded stations.
• Press OK button on the remote control to continue and the next menu will
be displayed on the screen.
1
2
5
4
A message will be displayed asking wheter you want to do network settings.
Select
Yes
and the
Network Settings
menu will be displayed. Please refer
to
Connectivity
section to configure a wired or a wireless connection. After
the settings are completed press
OK
button to continue.
3
•
Afterwards Digital Search Type screen will be displayed.
Please select Aerial
option and press
OK
button to continue, a message
asking for the starting process appears on the screen. To continue please
select YES and press
OK.
The television will search for avai̇lable
broadcasts.
To cancel operation, select
NO
and press
OK.
Note:
As the Cable feature is not supported in the UK, please ensure that you
select Aerial during the First Time Installation. If you mistakenly select Cable,
please repeat the First Time Installation (which can be selected from the
tuning menu) and select Aerial.
•
You can activate Store mode option by using "
left
" or "
right
" button. If Store
Mode is selected, your TV's settings will be configured for store
environment. For home use select Home Mode. A confirmation screen will
be displayed if Store Mode is selected. Select YES and press the OK button
to proceed.
•
This option will be available in
Other Settings
menu and can be turned
off/on later.
5
0
3
1
2
5
6
9