Hitachi 51XWX20B Operating Manual Download | Manualshive

Page: 6 / 80

background image

HOOK-UP CABLES AND CONNECTORS

6

ANTENNA CONNECTIONS TO REAR JACK PANEL

VHF (75-Ohm) antenna/CATV (Cable TV)

When using a 75-Ohm coaxial cable system, connect the outdoor antenna or CATV
coaxial cable to the ANT A (75-Ohm) terminal. If you have a second antenna or
cable TV system, connect the coaxial cable to the ANT B terminal.

To receive HDTV programs via the outdoor antenna or an un-encrypted digital Cable
connection, connect to ANT C (DTV).

VHF (300-Ohm) antenna/UHF antenna

When using a 300-Ohm twin lead from an outdoor antenna, connect the VHF or
UHF antenna leads to screws of the VHF or UHF adapter. Plug the adapter into
the antenna terminal on the TV.

When both VHF and UHF antennas are connected

Attach an optional antenna cable mixer to the TV antenna terminal, and connect
the cables to the antenna mixer. Consult your dealer or service store for the
antenna mixer.

To outdoor antenna
or CATV cable

To second antenna
or cable system

To third antenna
or cable system

To outdoor VHF
or UHF antenna

From UHF antenna

ANT A/ANT B

From outdoor
antenna or
CATV System

Antenna Mixer

Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For
best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell
audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output
and input connector types required by the various components and the length of each cable.

300-Ohm Twin Lead Connector

This outdoor antenna cable must be connected to an antenna
adapter (300-Ohm to 75-Ohm).

Phono Connector

Used on all standard video and audio cables which connect to
inputs and outputs located on the television’s rear jack panel
and front control panel.

“F” Type 75-Ohm Coaxial Antenna Connector

For connecting RF signals (antenna or cable TV) to the antenna
jack on the television.

S-Video (Super Video) Connector

This connector is used on camcorders, VCRs and laser- disc
players with an S-Video feature in place of the
standard video cable to produce a high quality picture.

IR Mouse Cable (Provided)

Connect the IR Mouse Cable to the IR BLASTER output of your
TV when using the A/V Network feature. You must place the IR
mouse transmitter in front of the IR sensor of your external
components. This connection allows your TV to control your
external components without using your external component’s
remote control.

Digital Visual Interface (DVI) Connection Cable

This cable is used to connect external devices with DVI-HDTV
output capability.

Optical Cable

This cable is used to connect to an audio amplifier with an
Optical Audio In jack. Use this cable for the best sound quality.

IEEE1394 Cable

This cable is used to connect your digital television to external
digital devices.

«
...
4
5
6
7
8
...
»

Summary of Contents for 51XWX20B

















































































Reviews:

No comments

Related manuals for 51XWX20B

Brand: Barco Pages: 13

Brand: Laserworld Pages: 10

Brand: BenQ Pages: 2

Brand: Intellitec Pages: 8

Cathy Protection

Brand: XD Design Pages: 3

Brand: Sony Pages: 105

Brand: Sony Pages: 148

Brand: Sony Pages: 32

Brand: Sony Pages: 13

Brand: Sony Pages: 52

SuperData VPH-1251Q

Brand: Sony Pages: 76

Brand: Sony Pages: 128

Brand: Sony Pages: 112

Brand: Sony Pages: 362

Brand: Dukane Pages: 4

Brand: Derksen Pages: 2

Brand: Derksen USA Pages: 10

Da-Snap Wrap Around Screen

Brand: Da-Lite Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands