background image

HOOK-UP CABLES AND CONNECTORS 

- 12 - 

Most video/audio connections between components can be made with shielded video 
and audio cables that have phono connectors. For best performance, video cables 
should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores 
that sell audio/video products. Below are illustrations and names of common 
connectors. 
Before purchasing any cables, be sure of the output and input connector types required 
by the various components. Also make sure the cables are the correct length. 

 

300-Ohm Twin Lead Connector 

This outdoor antenna cable must be connected to an antenna adaptor (300-Ohm to 75-
Ohm). 

 

Phono Connector 

Used on all standard video and audio cables which connect to inputs and outputs 
located on the Television's rear jack panel and front control panel. 

 

"F" Type 75-Ohm Coaxial Antenna Connector 

For connecting RF signals (antenna or cable TV) to the antenna jack on the television. 

 

S-Video (Super Video) Connector 

This connector is used on camcorders, VCRs, and laser disc players with an S-Video 
feature in  place of the standard video cable to produce a high-quality picture. 

ANTENNA CONNECTIONS TO REAR JACK PANEL 

VHF (75-Ohm) antenna/CATV(cable TV) 

When using a 75-Ohm coaxial cable system, connect the outdoor antenna or CATV 
coaxial cable to the VHF/UHF 75-Ohm terminal. 

Summary of Contents for 50EX12BA
















































Reviews: