Hitachi 43FWX20B, Service Manual

Page: 28 / 164

28
DP23/23G/24
Digital Convergence Remote Control
1 2 3
4 5 6
7 8 9
0
ANT INFO
VOL CH
POWER
TV CBL/SAT DVD/VCR
PIP
SWAP PIP MODE
FREEZE
VIDEO
PIP CH
MENU
MUTE
EXIT
LAST CH
REC ASPECT VIRTUAL HD
SELECT
CLU-4321UG
VID1 VID2
VID3 VID4
VID5
ROM READ
PHASE
CALCULATION
R/C must be in
VCR mode.
GREEN
ADJUSTMENT
CURSOR LEFT
CURSOR
DOWN
BLUE
(13x9)
REMOVE
COLOR
ROM WRITE
RASTER
POSITION
CROSSHATCH
VIDEO
CURSOR UP
CURSOR
RIGHT
RED
(7x5)
INITIALIZE
2.7.6 Magic Focus Initialize
Adjustment Preparation
(1) Receive any NTSC signal.
(2) Digital convergence adjustment should have been
completed.
(3) Set is in DCU adjustment mode.
Adjustment Procedure
(1) Press “PIP MODE” and then “PIP CH” to initialize
Magic Focus. The initialize operation starts and
several windows appear during this operation. It
takes about 30 seconds or less.
(2) When green dots appear, initialize operation is
finished.
(3) Turn power OFF on TV set.
REMARKS
Another way to start the initialize operation:
(1) Press “SERVICE ONLY” Sw. on DEF./CONV. PWB to
set DCU adj. mode.
(2) Press [PIP MODE] key on R/C. Then “ROM
WRITE?” is displayed for alarm. Next, press [PIP
CH] key on R/C to start initialization. When green
dots appear, initalization operation is finished.
NOTE: If there is an error message, red dots or an error
code, refer to page 57, CONVERGENCE
ERRORS.
*INITIAL:N*
Initialization Operation
BACK TO ADJUSTMENTS