Hitachi 42PMA400E, Service Manual

Page: 16 / 34

(5) Remove Front Frame
Remove 18screws(m) then remove
Front Frame.
Be careful not to fall down the Front
Frame when remove 18screws(m).
(6) Remove Front Filter (Glass)
Remove 8screws(n), and remove Filter
Fix Metal then remove Front Filter.
When attach the new Front Filter to the
Front Frame, locating the conducting
electrode side to the inside, and attach
Filter Fix Metal.
(7) Remove Fan (MFN1)
Remove 1screw(o) and disconnect
PFAN1(PH-3P) connector,
then remove Fan.
(only H1 panel)
(8) Remove Main Frame
Lay down the Plasma Display so that
the face is down on the soft thick (over
50mm) cushion. Be careful not to be
damaged the face of Display Panel.
Disconnect CN61(EV-6P) connector.
(H1 panel)
Remove 8 screws(q) and 5screws(r)
then disconnect CN1(LVDS) connector
which is attached Panel Module's Logic
Board. Remove Main Frame.
(H2 panel)
Remove 8 screws(q) then disconnect
CN1(LVDS) connector which is
attached Panel Module's Logic Board.
Remove Main Frame.
Screw(r)
Screw(n)
×
8
Front Filter
Filter Fix Metal
Screw(m)
×
18
16
Screw(r) Screw(r)
Screw(q)
×
8
Screw(r)
Screw(r)
Screw(o)
Screw(q) Screw(q)
Screw(q) × 8
(H1 panel)
(H2 panel)