35
ENGLISH
OPERATING INSTRUCTIONS (continued)
SETUP MENU (TV mode) (continued)
Selected characters
Setup hint
Select the country name by
SELECT buttons and press OK
button.
• If some required stations could not be preset in this auto tuning
function, select and preset the required station in the required
position by the manual tuning operation.
Press the OK button and it starts the auto tuning.
This is used to input the name of the TV station within 5 letters. After
fixing the cursor on the first digit, select a letter by
and
SELECT buttons and move to next digit by
ADJUST button.
Press the OK button again after finished.
• Selectable letters are “0”~”9”, ”A”~”Z”, “+”, “–”, ” ”(blank),
”,”(comma) and ”.”(period) .
Select the sound system through the 5 different settings.
Select the colour system through the 5 different settings.
If this is set to On, it helps to reduce the noise interference visible on
the screen, especially in the weaker signal reception areas.
If this is set to On, that position will be skipped while selecting posi-
tions by PROGRAM UP/DOWN buttons.
This is automatically set to On for those non-broadcasting channels.
After completing the fine-tuning, press the RETURN button to exit
this mode.
• The variable range is -56 ~ +56.
Select the teletext language through the 4 settings.
• Select West Europe when watch in Singapore, Australia, Malaysia,
and so on.
If this is set to On, the power will be turned off when there is no
transmission signal and no operation for about 10 minutes in the TV
mode.
Press OK button at the line that is required to change order, then the
characters will change to green. And move it up or down in the list
by pressing
and
SELECT buttons. And press OK button to
complete it. Press the RETURN button to exit.
Set the position number(0~199) or channel number(C
✱✱
, S
✱✱
) by
CHANNEL UP/DOWN buttons.
Auto Tuning
Search
Manual Tuning
Position
Name
Sound System
Colour System
Skip
At first, select the channel entry method, entering a two digit chan-
nel number(CH), entering a two digit S-band number or entering a
three digit frequency(MHz), by pressing the OK button.
Search
Set this to Off normally. If it is set to On, AV4 (Scart) terminal oper-
ates as TV signal output, and the screen changes to display AV4
(Scart) input signal automatically.
Descrambler
NR
Fine Tuning
Sort
Increasing the frequency data
for the main tuner.
Decreasing the frequency
data for the main tuner
–
–
–
–
–
–
–
–
–
–
–
–
(A Line of position List)
Teletext Language
Auto Off
Country
(Page1) (Page2) (Page3)
( :a letter)
L L' BG
DK I
Auto PAL SECAM
NTSC3.58 NTSC4.43
Off On
Off On
Off On
Enter two digit number by pressing 0~9 NUMBER buttons. If the
number is normal, then it starts the channel search.
Enter two digit number by pressing 0~9 NUMBER buttons. If the
number is normal, then it starts the channel search.
(C--)
(S--)
–
–
Enter three digit number by pressing 0~9 NUMBER buttons. If the
number is normal, then it starts the channel search.
(--MHz)
1 2 3
••••••
199 AV00
Off On