29
GU
ID
E
A/
V N
ET
THE REMOTE CONTROL
MULTI PICTURE (PinP)
Activating the P-in-P mode from the RGB input screen
Pressing the PinP button one time will display 2 pictures.
•
This mode can be available from RGB1(DVI-PC) and RGB2(RGB) Input.
•
The speaker icon can be shifted up and down by pressing the A/B button; the audio of the video
will be output from the side on which the speaker icon is located.
•
The sub-screen position can be selected up and down by pressing
and
SELECT buttons.
•
The sub-screen can be selected with the AV1, AV2, AV3, AV4 and TV channel number buttons
from the status that the speaker icon appears on the left side of AV* as shown in the diagram
to the right.
•
Pressing the PinP button again or the RETURN button will cancel the 2 pictures display.
•
"Frequency Mode" in the Setup Menu should be set to Movie when sub-screen is the
component signal of 1080i/50 or 1080i/60.
AV1: Displays the VIDEO input signal of the sub-screen.
Displaying MULTI PICTURE
If the PinP button on the remote control is pressed MULTI PICTURE will display.
5AV1
RGB2
AV1
(
Sub
-
s
creen)
Activating the Split mode from the video input screen
Pressing the PinP button one time will display 2 pictures.
•
The speaker icon can be shifted left and right by pressing the A/B button; the audio of the video
will be output from the side on which the speaker icon is located.
•
The same video input mode cannot be selected for both screens at the same time.
•
Pressing the PinP button again or the RETURN button will cancel the 2 pictures display.
•
When the Video input is set to RGB Video, this Split mode is not possible.
•
Refer to the table for 2 pictures (Split) mode.
5AV1
AV1
AV2
PinP
bu
tton
RETURN
bu
tton
RECALL
bu
tton
A/B
bu
tton
S
ELECT
bu
tton
