Hitachi 37LD8800TA, Service Manual

Page: 23 / 128

23
55PD8800/37LD8800
Adj.
No
Function Max.
value
Init. Value
Device
ADJ. Items Mode PDP LCD
660 Y/C timing for M(4.5) system RF-Main 15 6 6 uPD64015
661 Y/C timing for (5.5MHz PAL/NTSC4.43) system RF Main 15 8 8 uPD64015
662 Y/C timing for (5.5MHz SECAM) system RF Main 15 8 8 uPD64015
663 Y/C timing for (6.0MHz PAL/NTSC4.43) system RF Main 15 8 8 uPD64015
664 Y/C timing for (6.0MHz SECAM) system RF Main 15 8 8 uPD64015
665 DAC Output Imapge Sync Comparison Setting DACLEVEL 1 0 0 uPD64015
666 Blanking Period Level Setting INBLK50IRE 1 0 0 uPD64015
667 Line Lock PLL Gain Setting HPLLG[4:0] AV 31 6 6 uPD64015
668 Motion Detection Gain Setting D2FGAIN[2:0] Except NTSC mode 7 5 5 uPD64015
669 Y/C timing for (6.5MHz PAL/NTSC4.43) system RF Main 15 8 8 uPD64015
670 HS Phase Setting for RGB Mix HSYNCDLY TEXT-1 Picture 1 1 1 uPD64015
671 Latter Part VS Phase Setting for RGB Mix VSDLY 1 0 0 uPD64015
672 SG Color Setting SGCOLOR[2:0] 7 0 0 uPD64015
673 SG Mode Setting (0:OFF/1:Ramp/2:Raster/3:STEP/4:BAR[75%]/5:[100%]) 5 0 0 uPD64015
674 Y/C timing for (6.5MHz SECAM) system RF Main 15 8 8 uPD64015
675 SG Level Setting SGPEDLEV 1 0 0 uPD64015
676 TEXT-2 Picture 1 1 1 uPD64015
677 Motion Detection Characteristic Test8 C2O Except NTSC mode 1 0 0 uPD64015
678 Motion Detection Characteristic Test9 MDMVD Except NTSC mode 1 0 0 uPD64015
679 Color Processing Status SETCOLOR[3:0] (READ Value) - - - uPD64015
680 Color System Detection Mode MODDET (READ Value) - - - uPD64015
681 Composite V Judgement-Input (0:no signal/1:50Hz/2:60Hz) - - - uPD64015
682 Composite V Judgement-Result (1:50Hz/2:60Hz) - - - uPD64015
683 No Signal Detection Characteristic Setting SIGDETLV 1 1 1 uPD64015
684 Image Input Signal Status Setting SIGON 1 0 0 uPD64015
685 Image Input Signal Status Setting SIGOFF 1 0 0 uPD64015
686 Field Frequency Setting TV50F 1 0 0 uPD64015
687 Field Frequency Setting TV60F 1 0 0 uPD64015
688 50 Hz Image Signal Sub Carrier 504M 1 0 0 uPD64015
689 50 Hz Image Signal Sub Carrier 503M 1 0 0 uPD64015
690
COLOR SYSTEM Judgement Method (0:Normal/1:System1&2 Correction has
no effect)
1 0 0 uPD64015
691 Sharpness Gain(TEXT-2 pictures) Sub 15 0 0 TB1274
692 Sharpness Adjustment SHPGAIN[7:0]
NTSC(S Input) Separate from
#524
255 150 125 uPD64015
693
Except NTSC(S Input)
Separate from #525
255 155 125 uPD64015
694 576i Separate from #526 255 130 130 uPD64015
695 Tint Adjustment HUE[7:0]
NTSC(S Input) Separate from
#556
255 130 133 uPD64015
696
Except NTSC(S Input)
Separate from #557
255 124 137 uPD64015
697 DCBLV (COOL) 1 1 1 PDP
698 DCBLV (NORMAL/WARM/B&W) 1 0 0 PDP
699 DCBLV (RGB) 1 0 0 PDP
700 Mode display 0:Normal, 1:RF mode only, 2:All 2 0 0 M30627
701 Horizontal Position of OSD 15 7 7 OSD
702 Vertical Position of OSD 15 7 7 OSD
703 Typical Value of Contrast OSD DYNAMIC 31 31 31 M30627
704 Temperature for Fun start (Temp_High) 254 58 58 TEMP
705 Temperature for Fun stop (Temp_Low) 254 55 55 TEMP
706 Display of internal temperature ºC (Temperature) 125 - - TEMP
707 Power Save/Screen Saver On/Off Setting at Initialize, Reset and Shipping
P.S/S.S
0:Off/20m
1:On/Off
2:Off/Off
2 0 0 M30627
708 PC Power Save function (0:Impossible, 1:Possible) 1 1 1 M30627
709
Movement Amount of Image Retention Reduction Operation
0:±2pixel/1:±4pixel/2:±6pixel/3:±10pixel
Adjustment Value is available
only during HD single picture
mode.
3 0 0 FC
710 480i,576i switch 0:uPD64015, 1:TA1391(Though) 1 0 0 TA1391FG
711 Waite Time for POWER SAVE function (s) VIDEO/PC 254 15 15 M30627
712 BURN-IN enable/ disenable 0:Disenable, 1:Enable 1 1 1 M30627
713 BURN-IN mode 2 2 2 PDP
714 Recovery to an error of OSC frequency of Ceramic resonator for timer 62 34 34 M30627
715 EURO DK-SECAM MASK(V=60) 0:Normal 1:Mask(V=60) 1 0 0 -
716 Set Sound System at Auto mode of Sound Sys. (0:auto, 1:4.5MHz) Main 1 0 0 M30627
717
Power condition at power save mode of PC mode
after done RESET function 0:Keep last condition,
1:Return to normal condition
1 0 0 M30627
718
Select Wide mode for Europe model
(Normal= 5mode/ For Service= 10 mode)
0:Normal, 1:For service 1 0 0 M30627
719 Thermo sensor function available or not 0:None, 1:Yes 1 0 0 M30627