35
A80LJF30X(W)
North
1-1 Adjustment Preparation
(1)
Keep DY stick to CPT funnel.
(2)
Turn ON the set and receive cross-hatch signal
(or circle pattern signal). Adjust the static conver-
gence coarsely according to item (VlII, 1-4).
(3)
Receive white pattern signal and adjust the white
balance according to item 4-6.
(4)
Set BRIGHTNESS control and CONTRAST con-
trol to maximum and apply heat-run to the set
with circle pattern signal received for 40 min. or
more.
1-2 Purity Adjustment
THIS ADJUSTMENT METHOD APPLIES TO
THE PURITY ADJUSTMENT BY USING
MICROSCOPE.
(1) Adjust coarsely White balance, Static conver-
gence (center) and Focus.
(2)
Receive circle pattern and heat-run more than T
minutes with CONTRAST and BRIGHTNESS to
maximum. Do not delete the raster nor vary the
current before fixing the position of DY. Heat-run
should be done with perfect raster. (DY and tilt
should have been coarsely adjusted.)
Raster Wane NG
TABLE 1
CPT
T
A80LJF30X(W)
40 Min.
(3) The magnetic field in artificial magnetic field should
follow the table below and the set should face as in
Table 2. Degauss it from outside.
DESTINATION
VERTICAL
FIELD
HORIZONTAL
FIELD
USA
CANADA
UNIVERSAL
PANAMA, HAWAII
0.45G
0.54G
0.35G
0.2 G
0.3 G
0.15G
0.3 G
0.3 G
TABLE 2
Directions for adjustment
(4) Adjust the position of purity magnet and DY. Keep
the landing balance of
햴
and
햺
, and adjust so that
the landing of
햴
and
햺
is as follows while observ-
ing with a microscope.
GREEN
9
GREEN
3
A
1
~ B
Out Side
A
1
~ B
Out Side
Phosphor
Beam
Black
Matrix
Adjustment point
30mm away from each
end of
3
and
9
2P (Purity Magnet)
6P
4P
2P (Purity Magnet)
6P
4P
(a) Open the purity magnet as follows in order to
move the raster only in the right-left direction.
C-F MAGNET
P#2773671
C-F MAGNET
P#2773672
Keep the balance of 3 / 9 DY landing
(b) YPB (Yoke pull-back) should be as follows.
(Distance between the bumped position of DY
toward the funnel and the just-landing position of
햴
and
햺
.)
Summary of Contents for 32UX01S
