GB
- 27 -
Connect Peripheral Equipment
High Definition
Your LCD Television is capable of displaying High
Definition pictures from devices such as a High Defi-
nition Satellite Receiver or DVD Player. These devices
must be connected via the HDMI socket or Compo-
nent Socket. These socket can accept either 720p or
1080i signals.
Note:
When it is desired to watch HDMI source with
a DVI to HDMI cable; in order to enable au-
dio, Audio Input (which is located at the left
side of the antenna input) is to be used to get
DVI device’s audio signals.
Via The Scart
The TV has 2 Scart sockets. If you want to connect
peripherals (e.g. video, decoder, etc.) which have Scart
sockets to the TV, you can use SCART socket of the TV.
Note:
If an external device is connected via the Scart
sockets, the TV will automatically switch to
AV mode. If both sockets are employed at the
sime time, SCART 1 becomes the preferen-
tial.
Via Aerial Input
If the device you want to connect does not have a
Scart socket, you should connect it to the Aerial input
of the TV.
If the VCR is connected via Aerial input, it is
suggested to use Programme 0.
Decoder
If you are subscribed to cable TV offers, the
organisation will supply you a corresponding decoder
unit to allow the programmes to be unscrambled.
For further information consult your dealer.
Connect a decoder with an aerial socket to
the TV
• Connect the aerial cable.
Connect a decoder without an aerial socket
to the TV
• Connect the decoder to the EXTERNAL socket of
TV with a RCA cable. Through the SCART/RCA
socket of the decoder, you may attain a better dis-
play resolution.
TV And Video Recorder
• Connect the aerial cables.
Better picture quality can be obtained if you also con-
nect a Scart cable to
SCART
sockets.
Playback NTSC
• Connect NTSC VCR player to a Scart socket of the TV.
Then, press the “
AV
” button to select EXT1 or EXT2.
Copy Facility
Source selection for
VCR
recording.
• Select
Feature
menu.
• Select
SCART 2 Out
by pressing
_
/
`
button.
• For copying the picture that comes from the tuner,
select SCART 1.
Note :Scart-1 socket cannot be used as DTV output.
Please use Scart-2 instead.
Camera And Camcorder
To Connect To AV Input
Connect your camera or camcorder to AV input of the TV.
• Connect your equipment to the TV via
VIDEO
(yel-
low),
AUDIO R
(red) and
AUDIO L
(white) inputs.
You must connect the jacks into the input with the
same colour.
To Connect To S-VHS Input
Connect your camera or camcorder S-VHS input of
the TV.
• Connect your equipment to the TV via S-VHS input
and audio inputs of AV inputs by using S-VHS
cables.
Connect the Decoder to the Video
Recorder
Some video recorders have a special Scart socket
for decoder.
• Connect a Scart cable to the Scart socket of your
decoder and to the special Scart socket of your video
recorder. Refer to the booklet of your video recorder.
Connecting Headphones (optional)
Use the stereo headphone socket of the TV, to con-
nect headphones.
Note:
If you want to connect more equipment to your
TV, consult your dealer.)
Connecting Subwoofer
Use
Subwoofer Out
socket to connect an external,
active subwoofer to the set to give a much deeper
bass effect.
Audio Lineout
To connect the external speakers to your TV, use the
Headphone Line Out of the TV. Additionally, turn “Line
out” setting on in the “Sound Menu”.
Note:
While watching PC or YPbPr sources, Lineout
selection could only be the current source.
