background image

IMPORTANT SAFEGUARDS 

6 Never push objects of any kind into this television set through cabinet slots as they 
may touch dangerous voltage points or short out parts that could result in a fire or 
electric shock. Never spill liquid of any kind on the television set. 

 

7 If the television set has been dropped or the cabinet has been damaged, unplug this 
television set from the wall outlet and refer servicing to qualified service personnel. 

 

8 If liquid has been spilled into this television set, unplug it from the wall outlet and refer 
service to qualified service personnel. 

 

9 Do not subject your television set to impact of any kind. Be particularly careful not to 
damage the picture tube surface. 

 

10 Unplug this television set from the wall outlet before cleaning. Do not use liquid 
cleaners or aerosol cleaners. Use a damp cloth for cleaning. 

 

11-1 Do not place this television set on an unstable cart, stand, or table. The television 
set may fall, causing serious injury to a child or an adult, and serious damage to the 
appliance. Use only with a cart or stand recommended by the manufacturer, or sold with 
the television set. Wall or shelf mounting should follow the manufacturer's instructions, 
and should use a mounting kit approved by the manufacturer. 

 

11-2 An appliance and cart combination should be moved with care. Quick stops, 
excessive force, and uneven surfaces may cause the appliance and cart combination to 
overturn. 

PROTECTION AND LOCATION OF YOUR SET 
 
12 Do not use this television set near water... for example, near a bathtub, washbowl, 
kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. 
 

Summary of Contents for 31DX11B






















































Reviews: