Hitachi 20LD2500, Instructions For Use Manual

Page: 31 / 40

- 30 -
• Select the required Teletext page.
• Press the “ ” button.
• Select the required subcode page number
by pressing four digit buttons (e.g. 0001).
• If the selected subcode page is not displayed
in a short time, press the “ ” button. TV
programme will be displayed on the screen.
• Teletext page number will be displayed on
the upper left corner of the screen when the
selected page is found.
• Press the “ ” button to display the se-
lected Teletext page.
To Exit Teletext
• Press the “ TV ” button. The screen will
switch to TV mode.
To Display The Time
• While watching a TV programme with Tele-
text transmission press the “ ” button.
The current time information, captured from
Teletext will be displayed on the screen.
• If the programme being watched does not
have Teletext transmission, no information
will be displayed.
• Time information is displayed on the screen
for 10 seconds. If you want to cancel the dis-
play, press the " " button.
Fastext
Your TV supports the Fastext Teletext sys-
tem. When the page number of any of the
pages in memory is entered, the system will
not search for the requested page; instead it
will display the page automatically.
• Press the “
P/CH+
” button to move the Tele-
text screen forward one page at a time.
• Press the “
-P/CH
” button to move the Teletext
screen backward one page at a time.
For Fastext
The subject-heading for the information may
have a particular colour.
• Press an appropriate RED
,
GREEN
,
YELLOW
or
BLUE
button in order to reach the relevant
page quickly.
Connect Peripheral
Equipment
There is a wide range of audio and video
equipment that can be connected to your TV.
The following connection diagrams show
you where the different (Optional) equipment
should be connected at the rear side of the
TV.
PC Sound Connection
Connect the audio output (line out) of your
PC to the audio inputs of your TV (see I and
J on the next page) with a stereo sound
cable.
Via The SCART
Your TV has one SCART socket. If you want
to connect peripherals (e.g. video, decoder,
etc.) which have SCART Sockets to the TV,
use SCART input.
If an external device is connected via the
SCART socket, the TV will be switched to AV
mode automatically. If the external device is
connected to SCART input and the signal is
RGB1, select RGB1 by pressing the “
AV
”
button.
Via Aerial Input
If you want to connect to your TV, peripherals
like video recorders or decoders, but the de-
vice you want to connect does not have a
SCART Socket, you should connect it to the
Aerial input of the TV.
If the VCR is connected via Aerial input it
is suggested to use Programme 0.
Decoder
Cable TV offers you a wide choice of
programme. Most of them are free, others
are to be paid for by the viewer. This means
that you will need to subscribe to the broad-
casting organisation whose programmes
you wish to receive. This organisation will
supply you a corresponding decoder unit to
allow the programmes to be unscrambled.
2016-ENG-1549 UK-20 INCH 17MB18 IDTV-(BACK AV)(CMEI)-HITACHI 20LD2500-50087080.p65 15.05.2006, 10:15 30