70
ENGLISH
Troubleshooting
The TV does not operate properly.
The video function does not work.
The remote control
does not work
Power is suddenly
turned off
No picture & No sound
Picture appears slowly
after switching on
No or poor colour or
poor picture
Horizontal/vertical bars
or picture shaking
Poor reception on
some channels
Lines or streaks in
pictures
Ŷ
Check to see if there is any object between the TV and
the remote control causing an obstruction. Ensure you are
pointing the remote control directly at the TV.
Ŷ
(QVXUHWKDWWKHEDWWHULHVDUHLQVWDOOHGZLWKFRUUHFWSRODULW\
WRWR
Ŷ
Ensure that the correct remote operating mode is set: TV, STB
etc.
Ŷ
Install new batteries.
Ŷ
Is the sleep timer set?
Ŷ
Check the power control settings. Has the Power supply been
interrupted?
Ŷ
Is Auto sleep activated on this station?
Ŷ
Check whether the TV is switched on.
Ŷ
Try another channel. The problem may be with the broadcast.
Ŷ
Is the power cord inserted correctly into the mains?
Ŷ
Check your antenna direction and/or location.
Ŷ
Test the mains outlet by plugging another TV into the same
outlet.
Ŷ
This is normal, the image is muted during the TV startup
process. Please contact your service centre, if the picture has
QRWDSSHDUHGDIWHU¿YHPLQXWHV
Ŷ
Adjust Colour in menu option.
Ŷ
$OORZDVXI¿FLHQWGLVWDQFHEHWZHHQWKH79DQGWKH9&5
Ŷ
Try another channel. The problem may be with the broadcast.
Ŷ
Are the video cables installed properly?
Ŷ
Activate any function to restore the brightness of the picture.
Ŷ
Check for local interference such as an electrical appliance or
power tool.
Ŷ
Station or cable channel experiencing problems, tune to
another station.
Ŷ
Station signal is weak, reposition the antenna to receive
weaker stations.
Ŷ
Check for sources of possible interference.
Ŷ
Check antenna (Change the position of the antenna).
