MAINTENANCE
AND
INSPECTION
●
Service
parts
list
CAUTION
Repair,
modi
fi
cation and inspection of Hitachi Power Tools
must be carried out by a Hitachi Authorized Service Center.
This Parts List will be helpful if presented with the tool to the
Hitachi Authorized Service Center when requesting repair
or other maintenance.
In the operation and maintenance of power tools, the safety
regulations and standards prescribed in each country must
be observed.
MODIFICATIONS
Hitachi Power Tools are constantly being improved
and modi
fi
ed to incorporate the latest technological
advancements.
Accordingly, some parts may be changed without prior
notice.
NOTE
Due to HITACHI’s continuing program of research and
development, the speci
fi
cations herein are subject to change
without prior notice.
LISTENING
TO
THE
RADIO
1. Insert the battery
Insert the battery in the direction
of the arrow until it clicks.
To remove the battery, press the
latch and remove the battery.
WARNING
When not in use or during inspection and maintenance, be
sure to remove the battery.
●
Cleaning
on
the
outside
When the radio is stained, wipe with a soft dry cloth or a
cloth moistened with soapy water.
Do not use solvents containing chlorine, gasoline or paint
thinner as they may melt plastic.
●
Storing
the
Radio
• After use, turn o
ff
the power and store the radio.
• If the radio will not be used for a long period, remove the
battery.
• Do not store the radio in the following places.
○
Within reach of or easily accessible to children
○
In humid or dusty places
○
In high temperature such as inside a car or exposed
to direct sunlight
○
Where the temperature changes drastically
○
Where it is exposed to smoke or steam such as near
a cooking appliance or humidi
fi
er
Item
No.
Part Name
Q’TY
1
ROD ANTENNA
1
2
HOUSING (B)
1
3
WASHER
1
4
SCREW
1
5
ROLL PIN
2
6
NAME PLATE
1
7
SCREW
6
8
LIGHT COVER
1
9
LENS
1
10
REFLECTOR
1
11
SCREW
2
12
SCREW
4
13
SCREW
2
14
PCBA
1
15
BAND SWITCH
1
16
HOUSING (A) ASS’Y
1
17
SPRING
1
18
LIGHT SWITCH
1
19
VOLUME DIAL
1
20
TUNING DIAL
1
2. Turn on the power
Rotate the power/volume dial
clockwise to turn on the power.
3. Select the mode
Slide the AM/FM selector lever
to select AM or FM mode.
4. Select a station
Rotate the tuning dial to select
the desired station.
FOR
BETTER
RECEPTION
FM
Adjust the length, direction and
angle of the antenna to ensure the
best reception.
AM
The radio has a built-in antenna. Turn
the radio around to
fi
nd the direction
with the best reception.
Location
○
Reception may be poor when the radio is used inside a
building or vehicle.
Place the radio near the window to ensure better reception.
○
Noise may occur if the radio is placed near a device that
generates noise.
Move the radio away from the source of the noise.
○
Noise may occur if a mobile phone is placed near the radio.
A mobile phone emits radio waves both during calls and in
standby mode.
If possible, keep mobile phones away from the radio.
IF
THERE
ARE
SMOKE
OR
ODORS
WARNING
If the radio emits smoke or an abnormal smell, rotate the
power/volume dial to OFF and remove the battery.
Continued use of the radio may result in
fi
re or electric
shock.
Contact the shop where the radio was purchased.
Antenna
Handle
Power/Volume dial
Lens
LED light
Light switch
Speaker
Battery
Latch
AM/FM
selector lever
Tuning dial
Latch
AM/FM selector lever
Power/Volume dial
Tuning dial
Antenna
Lens
LED light
Light switch
TURNING
ON
THE
LED
LIGHT
○
The LED light turns on
and o
ff
each time the light
switch is pressed.
○
The LED light can be
turned on while listening to
the radio.
NOTE
If the lens is dirty, wipe it
gently with a soft cloth.
000̲UR10DL̲Eng.indd 3
000̲UR10DL̲Eng.indd 3
2009/10/14 17:50:47
2009/10/14 17:50:47
