Hitachi Cable WirelessIP 3000 User Manual Download Page 23

Page: 23 / 132

- 2-3 -

Chapter 2

Placing and
Receiving Calls

Calling method

Inputting the telephone number and making a call

When making a call, check that the internal line number is displayed on the display

If "Not connected" or "Not registered" is displayed, this phone can not be

used.

Enter the telephone number, then press the

key.

(When making an internal call, input the internal line number.)

"Sending" is displayed on the display and you can hear the ringer at the other end.

If their name is registered in the contacts list, their name is displayed

above the telephone number.

When the other party answers, the call time is displayed.

You can adjust the volume with the and keys.

When you press the

key, the phone goes into "mute mode" and the other party

can not hear you at all.

To end "mute mode", press the

key again.

To end the call press the

key.

Summary of Contents for WirelessIP 3000





































































































































Search results

Summary of Contents for WirelessIP 3000

Reviews:

Hitachi Cable WirelessIP 3000, User Manual, Page: 23 / 132

Search results

Summary of Contents for WirelessIP 3000

Reviews: