Multi-Gym
Assembly Instructions
Step 1: Connecting the base frame, support frame, and vertical support
What you will need:
•
Vertical support x 2
•
Support frame x 2
•
Base frame x 2
Screws and Tools:
•
Open-end wrench
•
Allen Key (large)
•
M10*75 screw x 2
•
M10*45 screw x 4
•
Arc (curved) washer x 4
•
Flat washer x 8
•
M10 nut x 4
Base Frame
Vertical Support Frame
Support Frame
1
2
3
Directions
1. Align the vertical support to the last set of holes on the base frame. Using two M10*45
screws, four flat washers (to be put on both sides), and two M10 nuts, screw and tighten
with an open-end wrench and Allen key so vertical support is connected to the base frame
2. Take the support frame and align it to the base frame and vertical support
Connect to the base frame using two M10*45 screws, four flat washers (to be put on both
sides), and two M10 nuts. Screw and tighten with an open-end wrench and Allen key, so
the support frame is connected to the base frame
3. Take the two M10*75 screws, four arc washers (to be put on both sides), and two M10
nuts to connect the support frame to the vertical support. Screw and tighten with an
open-end wrench and Allen key
Repeat on the other side
Summary of Contents for Multi-Gym
Page 1: ...Multi Gym ...
Page 17: ......
