background image

    
                                 

 

MH-082-00  Ecomaster Basic Manual

 

 

PAGE 4 de 7 

Ecomaster Basic  

 

 

 

1.2  Start up of forced air fan. 

 
To activate the forced air fan press the key

.(4). When pressed once the evaporator fans will start up at 

low speed. Pressing a second time will change the speed to high; pressing a third time will stop the fans. 

 

When the fans are at low speed led No.8 located next to the key will light up in green; the light will turn 

red if light speed is selected. 

 

Note: fans may not start if the vehicle engine is stopped or if the alternator is not charging. 

 
During fan operation the status of recirculation flaps can be selected by using the key 

(5). Each time 

the key is pressed the position of the flaps changes from allowing the entry of outside air to the 

recirculation position. 

 

When the flaps are in recirculation mode, led No.9 located beside the key will light up in the red. If fresh 

air in entering from outside, the led will light up in green. 

 

1.3 Start up of the air conditioning

To Start up the air conditioning  simply press the 

(3) after starting the engine. If the engine is not 

running or there is a low battery level, then the air conditioning will not start when the key 

(3)  is 

pressed.  
When first started led No.6 in the led bar Hill Light up indicating that the temperature selected is 22ºC. To 
turn off the air conditioning simply press the key  

(3), again, turning off all the led lights in the bar. 

When the air conditioning is started  the flaps will automatically move to the recirculation position; this 
position can be changed by pressing the key  

(5).  

The control will record the last temperature, fan speed and flap status selected for up to 30 minutes after 

stopping the engine or until the control no longer receives any power supply. 

If the Ecomaster Basic is manually shut down by pressing the key  

(5),and then started up again by 

pressing the same key, the control will begin to work at the temperature of 22ºC . However if the air 

conditioning is stopped when the engine is turned off, (if no more than 30 minutes has passed since it 

was shut down) then upon starting up again, the air conditioning will start at the same temperature, fan 

speed and flaps status selected before to shutting off the engine. 
 
 
 
 
 
 

Reviews: