hisky X-65, Instruction Manual, Page: 11 / 14

18 19
Monitor system
Operation:
1)Press“up”to select “FUN MENU”,and press“ENTER”to come to the interface.
2)Press“up”or“down”to select “MONITOR”,and now the shadow area is the item that can
be set currently.Press“ENTER”to go to the next step.
3)When you move the sticks or channel switches,you can find the corresponding channel bars will
change accordingly.This function is designed to monitor the working conditions of the
transmitter.
4)After your setting,press “EXIT”to save the setting and leave the operation.
Remark:this function helps you adjust the setting,neutral trim as well as channel inspection.
Throttle curve operation
Operation:
1)Press“up”to select “FUN MENU”,and press“ENTER”to come to the interface.
2)Press“up”or“down”to select “THRO CURV”,and now the shadow area is the item that
can be set currently.Press“ENTER”to go to the next step.
3)Press“ENTER” to select the throttle curve point.There are 5 points,they are L,1,2,3,H.
Press“INC”or“DEC”to set the corresponding value separately,and the throttle curve will
change accordingly.
4)There are three throttle curves to be selected,normal,“IDLE 0”and“IDLE 1”by the switch at
the left top of the transmitter..
5)After your setting,press“EXIT”to save the setting and leave the operation.
Remark:the transmitter can save 3 groups of different throttle curves.When you make 3D fly,
please ask for instruction from experienced pilots.
3.6 SWASH.MIX
3.7 GYRO.SENS
3.8 THRO CURV
3.9 MONITOR