Hisense WMS017M6XBE, Use & Care Manual

Page: 7 / 13

Reversing the Door
5
The side at which the door opens can be
changed from the right side (as supplied) to the
left side, if the installation site requires.
Tools you will need:
1.
8SFODI NN
2.
1IJMJQT4DSFXESJWFS
3. Putty knife or thin-blade screwdriver
Before you start lay the refrigerator on it’s back in
order to gain access to the base, you should rest
it on soft foam packaging or similar material to
avoid damaging the cooling pipes at the rear of
the refrigerator.
༃ƵƉƉĞƌŚŝŶŐĞĐŽǀĞƌ
༆ ŚŝŶŐĞŚŽůĞĐĂƉ
༉
ůŽǁĞƌŚŝŶŐĞ
༄
ƐƉĞĐŝĂůĨůĂŶŐĞƐĞůĨͲƚĂƉƉŝŶŐƐĐƌĞǁ
༇ ƐĐƌĞǁ
༊
ƐƉĞĐŝĂůĨůĂŶŐĞƐĞůĨͲƚĂƉƉŝŶŐƐĐƌĞǁ
༅ƵƉƉĞƌŚŝŶŐĞ
༈
ĚŽŽƌƐƚŽƉƉĞƌ
་ ďŽƚƚŽŵ
ĨĞĞƚ
༌ƐĐƌĞǁŚŽůĞĐŽǀĞƌ
Ɣ
Open the refrigerator door and remove all fittings inside the door.
Ɣ
Remove the upper hinge cover
ǐ
.
Ɣ
Remove the two screws
Ǒ
that connect the upper hinge
ǒ
on the right side of the ca
ELQHW
top.
Ɣ
Carefully lift the door and place it on a padded surface to prevent scratching.
Ɣ
Remove the screw hole cover
Ǚ
and hinge hole cap
Ǔ
and transfer it to the uncovered hole on the right
side of the unit. Be sure to press the button firmly into the hole.
Ɣ
Remove the screw
ǔ
attached to the door stopper
Ǖ
, then remove the door stopper, replace the door
stopper to the other side of the door, and fix it with screw.
Ɣ
Remove the two screws
Ǘ
that hold the lower hinge
ǖ
on the right side of the cabinet.
Ɣ
Remove the bottom feet
ǘ
and transfer it to the right side of the cabinet.
Ɣ
Set the door into its new place making sure the pin enters the bushing at the lower frame section (hole).
Ɣ
Secure the upper hinge
ǒ
previously removed in step 4 on the left side of the unit. Make sure the pin enters
the bushing on the upper frame section (hole).
Ɣ
Loosely secure the lower hinge
ǖ
and do not tighten the bolts until the door is in the closed position and
leveled.
Ɣ
Replace the upper hinge cover
ǐ
.
Ɣ
Turn the door upright again.
Ɣ
Open the door and attach all fittings.