Hisense U5120G User Manual Download Page 19

FCC INFORMATION (for US customers)

Warning:

- This equipment should be installed and operated with 

minimum distance 20cm between the radiator & your 

body.

-  Changes or modifications to this unit not expressly 

approved by the party responsible for compliance could 
void the user’s authority to operate the equipment.”

NOTE:
• 

This equipment has been tested and found to 

comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against 

harmful interference in a residential installation. This 

equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful 

interference to radio communications.

•  However, there is no guarantee that interference will not 

occur in a particular installation.  If this equipment 

does cause harmful interference to radio or television 

reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try 

to correct the interference by one or more of the 

following measures:

-  Reorient or relocate the receiving antenna.
-  Increase the separation between the equipment and 

receiver.

-  Connect the equipment into an outlet on a circuit 

different from that to which the receiver is connected.

-  Consult the dealer or an experienced radio / TV 

technician for help.

This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions:  
(1)  this device may not cause harmful interference, and 
(2)  this device must accept any interference received, 

including interference that may cause undesired 

operation.

•  Shielded cables must be used with this unit to ensure 

compliance with the Class B FCC limits.

IC Notice:

This device contains licence-exempt transmitter(s)/receiver(s) 

that comply with Innovation, Science and Economic 

Development Canada’s licence-exempt RSS(s). Operation is 
subject to the following two conditions:
1.   This device may not cause interference.
2.   This device must accept any interference, including 

interference that may cause undesired operation of 

the device.

Réglement de la FCC (pour les clients américains)

Avertissement :

-  Pour rester en conformité avec les consignes d’exposition aux 

RF, placez le produit à au moins 20 cm des personnes proches.

- Les changements ou modifications de cet appareil non 

expressément approuvées par la partie responsable de la 

conformité pourraient annuler l’autorisation de l’utilisateur à 
utiliser l’équipement.

REMARQUE :

•   Ce dispositif a été testé et déclaré conforme aux limites 

d’un dispositif numérique de classe B, conformément à 

la partie 15 des règles de la FCC.

 

•   Cependant, il n’est pas garanti que des interférences 

ne se produiront pas dans une installation particulière. 

Si cet appareil provoque des interférences nuisibles 

à la réception radio ou de télévision, ce qui peut être 

déterminé en mettant l’appareil hors tension, l’utilisateur 

est encouragé à essayer de corriger l’interférence par 

une ou plusieurs des mesures suivantes :

-   Réorienter ou déplacer l’antenne de réception.
-   Augmenter la distance entre l’appareil et le récepteur.
-   Brancher l’appareil à une prise sur un circuit différent de 

celui sur lequel le récepteur est branché.

-   Consulter le revendeur ou un technicien radio/TV 

expérimenté.

Cet appareil est conforme à la partie 15 des règles de la 

FCC. Son fonctionnement est soumis aux deux conditions 
suivantes :
(1)  ce dispositif ne peut pas causer d’interférences nuisibles et 
(2)  cet appareil doit accepte r toute inter férence reçue, y 

compris les interférences qui peuvent causer un mauvais 

fonctionnement.

•   Des câbles blindés doivent être utilisés avec cet apparei 

l pour assurer la conformité avec les limites de la classe B 

de la FCC.fonctionnement de I'appareil.

L’émetteur/récepteur exempt de licence contenu dans le 

présent appareil est conforme aux CNR d’Innovation, Sciences et 

Développement économique Canada applicables aux appareils 

radio exempts de licence. L’exploitation est autorisée aux deux 
conditions suivantes :
1.   L’appareil ne doit pas produire de brouillage;
2.   L’appareil doit accepter tout brouillage radioélectrique 

subi, même si le brouillage est susceptible d’en 

compromettre le fonctionnement.

EN

FR

Ces limites ont pour but d'assurer une protection 

raisonnable contre le brouillage nuisible dans une 

installation résidentielle. Cet équipement produit, 

utilise et peut émettre de l'énergie en radio fréquence 

et, s'il n'est pas installé et utilisé conformément aux 

directives, il peut causer un brouillage nuisible dans les 

communications radio. 

Avis d’Industrie Canada

WARNING: 

This product can expose you 

to chemicals including Lead, which is 

known to the State of California to cause 

cancer. For more information go to:

www.P65Warnings.ca.gov.

Summary of Contents for U5120G





















Reviews: