3.Switching on/off
1)Connect the TV to power outlet, the power indicator will be red and then turn blue. Several seconds later,
TV picture will display on the screen.
2)Press stand by button on the machine or the [Power] button on the remote control to turn off the TV.
4.Signal source selection
Press the number [1-9] button or [
or
] button to select TV input; press the [VIDEO] button to select VIDEO input;
press the [S-VIDEO] button to select S-VIDEO input; press the [ YPbPr] button to select YPbPr/YCbCr input; press
the [PC] button to select PC input;press the [DVI] button to select DVI input.
5.Air/Cable selection
You can select the signal receiving method according to the following steps:
1) Press the [MENU] button to enter the main menu.
2) Press the [ or ] button to select the item PRESET.
3) Press the [ or ] button to select the item RF INPUT.
4) Press the [ or ] button to change the item from among Air,
CATV(STD),CATV(HRC) and CATV(IRC).
6.Channel search
1) Press the [MENU] button to enter the main menu.
2) Press the [ or ] button to select the item PRESET.
3) Press the [ or ] button to select the itemAuto_search.
3) Press the [ ] button to start auto_searching.
7.Picture parameters adjustment
1) Press the [MENU] button to enter the main menu.
2) Press the [ or ] button to select the item Picture Parameters.
3) Press the [ or ] button to select the item you want to adjust.
4) Press the [ or ] button to adjust the level.
8.AUDIO SETTINGS
1) Press the [MENU] button to enter the main menu.
2) Press the [ or ] button to select the item AUDIO SETTINGS.
3) Press the [ or ] button to select the item you want to adjust.
4) Press the [ or ]button to adjust the level.
Note: All buttons mentioned above are on the remote control unless indicated otherwise.
- 5 -
Brief Operating Instructions
POSITION
SKIP
RF INPUT
AUTO SEARCH
AIR
POSITION
SKIP
RF INPUT
AUTOSEARCH
BASS
TREBLE
BALANCE
MTS
PRESET
PRESET
AUDIO SETTING
s
BRIGHTNESS
CONTRAST
SATURATION
HUE
COLOR TEMP
SHARPNESS
PICTURE PARAMETERS
FLESHTONE
