The food is too warm.
Interior lighting does
not work.
Unusual noises.
The compressor does
not start immediately
after changing the
temperature setting.
Water on the floor or
storage shelves.
Temperature is not properly
adjusted.
Door was open for an
extended period.
A large quantity of warm food
was placed in the appliance
within the last 24 hours.
The appliance is near a heat
source.
Light bulb is defective.
Door seal is not air-tight
(possibly after reversing the
door).
Appliance is not level.
The appliance is touching the
wall or other objects.
A component, e.g. a pipe, on
the rear of the appliance is
touching another part of the
appliance or the wall.
This is normal, no error has
occurred.
Water drain hole is blocked.
Please
the “Initial Start Up”
section.
refer to
Open the door only as long as
necessary.
Turn the temperature regulator
to a colder setting temporarily.
Please
the “Installation
location” section.
refer to
Please look in the “changing the
Light Bulb “section.
Carefully
warm the leaking
sections of the door seal with a
hair dryer (on a cool setting). At
the same time, shape the warmed
door seal by hand so that it sits
correctly.
Readjust the feet.
Move the appliance slightly.
If necessary, carefully bend the
component out of the way.
The compressor starts after a
period of time.
refer to the “Cleaning and care”
section.
Heavy build-up of
frost, possibly also on
the door seal.
What to do if…
Problem
Possible cause
Solution
Appliance does not
work.
Appliance cools too
much.
Appliance is not switched on.
Main plug is not plugged in or
is loose.
Fuse has blown or is defective.
Outlet is defective.
Temperature is set too cold.
Switch on the appliance.
Plug the appliance into the
electrical socket.
Check fuse, replace if necessary.
Defective parts need
repaired
to be
by an electrician.
Turn the temperature regulator to
a warmer setting temporarily.
Warning!
Before trouble-shooting,
disconnect the power supply. Only a
qualified electrician of competent
person must carry out the trouble-shooting
that is not in the manual.
Important!
Repairs
to
may only be
performed by competent service engineers.
Improper repairs can give rise to significant
hazards for the user. If your appliance
needs repairing, please contact your
specialist dealer or your local
Center.
the appliance
Customer
Service
17
Summary of Contents for RS-11DC4SAB/CPA
Page 65: ......