20
7. To ensure a good effect of file recording and good system stability, it is recommended for the
clients to use a dedicated HD which will not be used for other purpose.
8. The USB interface of the digital multi-media player supports most HDs, digital cameras, USB
discs, etc. In case of non-identification, it is not the machine fault but related to the device drive.
9. The USB interface of this machine provides 5V voltage with the maximum current being 500mA.
Some storage devices may adopt an interface standard that has some difference with the standard
USB protocol, which may affect the correct identification of the digital multi-media player. It is a
normal phenomenon.
10. The time needed for the digital multi-media player to read out information varies in different
devices with storage capacities, and there may be instant lowered information read-out speed. Please
be noted that it is not the machine fault.
11. MiniB interface can connect with USB disc device with attached connecting cable. And it can
not be connected to a HD at present.
12. In connecting to the printer, it is strictly prohibited to remotely control the machine to standby
status or alternatively turn on or off the machine while the printer is not powered off.
13. The maximum accuracy error of the real-time clock is 2min at most per month.
Schematic Diagram of Record & Play Circuit:
Summary of Contents for RL-32B02
