19
CAUTION!
Only after the door seals are
completely dry should the
appliance be powered on.
WARNING!
The LED light must be replaced by a
competent person. If the LED light is
damaged, follow the steps below:
1. Unplug your appliance.
2. Remove the light cover by lifting
up and pulling out.
3. Hold the LED light with one hand
and pull it while pressing the
connector latch with the other hand.
4. Replace the LED light andsnap it
correctly in place and replace the
light cover.
General Use Information
Replacing the LED light
When first turning on refrigerator after
a period of non-use, allow the
refrigerator to cool at least 2 hours
before adding food.
Do not block air circulation vents with
stored items.
Store items so that the air can circulate
freely around them.
Cover or wrap stored food well to avoid
transfer of odors.
Once defrosted, food quality will
deteriorate rapidly. Defrosted food
should not be refrozen.
Neither bottled nor canned drinks should
be stored in the freezer compartment.
Bottles and cans may explode.
Door Seal Cleaning
Take care to keep the door seals
clean. Sticky food and drinks can
cause seals to stick to the cabinet
and tear when you open the door.
Wash seal with a mild detergent
and warm water. Rinse and dry it
thoroughly after cleaning.
Opening the door for long periods can
cause a significant increase of the
temperature in the compartments of
the appliance.
Clean regularly the surfaces that can
come in contact with food and
accessible drainage systems.
Store raw meat and fish in suitable
containers in the refrigerator, so that it
is not in contact with or drip onto
other food.
Two-star frozen-food compartments are
suitable for storing pre-frozen food,
storing or making ice cream and
making ice cubes.
Two-star compartments are not
suitable for th freezing of fresh food.
To avoid contamination of food, please
respect the following instructions:
Summary of Contents for RF200D4CSE
Page 49: ......
