Hisense LMS016M6RBE, User'S Operation Manual

Page: 11 / 31

5FNQFSBUVSF
c
POUSPM
-
Remove all food.
Unplug the power cord.
Clean and dry thoroughly.
Leave the door open slightly to
prevent
odor and mold
growth .
Starting up and temperature
regulation
•
Insert the plug of the connection lead
into the plug socket with a protective
grounding contact.
•
The temperature selector knob is
located on the RH side of the refrigerator
compartment.
Setting “0” means: Off
Clockwise rotate the knob to turn on the
appliance.
Setting “1” means:
Highest temperature, warmest setting.
Setting “7” means:
Setting “7” (end-stop) means: Lowest
temperature, coldest setting.
7HPSHUDWXUH &RQWURO
Thermostat
knob
IMPORTANT !
It is recommended to use the “4”
setting. If warmer or colder
temperature is desired, please turn the
knob to a lower or higher setting.
Though the unit is energy efficient, it is
more
energy
at lower position settings.
IMPORTANT !
High ambient temperatures (e.g. on
hot summer days) and a cold setting on
the temperature regulator (position
"7"
) can cause the compressor to
run continuously or even non-stop
.
When the refrigerator is in use, the
compressor needs to be turned on and
off to ensure its properly defrosting.
Therefore, it is advised to avoid setting
the refrigerator’s notch to high (“7”). If
the refrigerator frosts too much, make
sure to set the refrigerator’s notch to a
lower setting.
Suggestion: What to do when in
use for a long period of time and
an evaporator banging sound is
heard
During use, the sound of ice cracking is
caused by thermal expansion and cold
contraction, which is a normal
phenomenon. You can manually adjust
the knob of the temperature controller
to 0, and then adjust to the appropriate
gear until there is no water bead
attached on the evaporator.
Vacation Tips: lf the appliance
will not be used for several
months
：
9
LMS044M6RVE/LMS033M6RBE/LMS033M6RVE
LMS026M6RVE/LMS026M6RBE