8
Connecting an AV receiver or digital sound bar
You can enjoy Dolby Audio
™
multichannel sound from your TV if you connect a digital amplifier or sound bar (not provided) in
either of two ways:
• Digital optical audio out (S/PDIF)
– Connect a TOSLINK optical cable (not provided) from the TV to the Optical input on
your receiver or sound bar.
• HDMI
®
ARC
– Connect an HDMI
®
cable (not provided) from the
HDMI (ARC)
connector to the HDMI
®
input on your
receiver or sound bar. This connection uses the Audio Return Channel (ARC) feature of the HDMI
®
specification to output
sound from the TV to a compatible device. To use this feature, you must configure the TV to enable HDMI
®
ARC, as
explained in
Enabling HDMI ARC on page 52
.
Preparing for Internet connectivity
If you want to connect your TV to the Internet to watch streaming content, you must connect using a wireless modem/router or
a wireless access point. The TV connects through a built-in wireless LAN adapter. The TV does not support a wired connection
or the use of a USB network adapter.
We recommend that your wireless connection support the IEEE 802.11b/g/n specification for the best experience.
Wireless Adapter
built-in the TV set
LAN Cable
Wireless Wi-Fi device or
Wireless IP sharer
The LAN Port on the Wall
NOTES
• You must use the Hisense built-in Wireless LAN Adapter to use a wireless network because the TV does not support an
external USB network adapter.
• To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports Dynamic
Host Configuration Protocol (DHCP), your TV can use a DHCP or static IP address to connect to the wireless network.
• Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is
currently being used by another device nearby, this will result in interference and communication failure.
• If you apply a security system other than the systems listed below, it will not work with the TV.
• If Pure High-throughput (Greenfield) 802.11N mode is selected and the Encryption type is set to WEP, TKIP or TKIP-AES
(WPS2 Mixed) for your Access Point (AP), then the Hisense TV will not support a connection in compliance with these
Wi-Fi certification specifications.
• If your access point (AP) supports Wi-Fi Protected Setup (WPS), you can connect to the network via Push Button
Configuration (PBC) or PIN (Personal Identification Number). WPS will automatically configure the SSID.
EXTERNAL DEVICES
Powerless
Bass Speaker
Speaker
Digital Sound Bar
Audio Amplifier
DIGITAL
AUDIO OUT
TV PORTS
/
AUDIO
OUT
Audio Cable
White(L)
Red(R)
Audio Cable
Connections and setup
Summary of Contents for LCDF0104
Page 1: ...English ES...
