14
Using the Remote Control
Quick starts
■
Turning your TV on and off
To turn your TV on: Connect the TV set to an AC power outlet with the power
adapter , the TV set would be standby mode.
Press [Power Standby] on the front panel or on the remote control to activate the unit.
A few seconds later an image will appear on the screen.
Turning off to standby mode: Press [Power Standby] on the front panel or on the
remote control to switch to standby mode. You can activate the unit again by pressing
[Power Standby].
Notes:
Remove the connection from the wall power outlet if you do not intend to use the unit
for longer periods, for example if you plan to be away a few days. Wait at least 5
seconds after turning off if you want to re-start the TV.
■
Selecting the video source
Choose the current input signal of the main picture. First press this [source] button to
display the signal inputs. Press [
Λ
/ V] button to select the source you wanted to enter,
then press [
＞
/ OK] button to confirm.
■
Adjusting the volume
To adjust the volume:
Press [VOL + / - ] to increase or decrease the volume. Press [Mute] to turn the sound
off. Press [Mute] again to turn the sound back on.
■
Changing channels
To change channels:
Press [CH + / - ] to go to the next higher or lower channel. Or, Press the number
buttons to select a channel. For example, to select channel 12, press 1, then 2. Or,
press [Recall] to go to the last viewed channel.
■
Selecting the sound mode
To select the sound mode:
Press [Audio] one or more times to select the sound mode you want. You can set as
Music, Standard, Speech and User. This mode achieves a special sound effect by
setting equalizer.
