- 23 -
Appendix
Accessories Installation Instructions
4. Hang the TV set with the equipped hanging
rollers on the
fi
xed hanging bracket. Secure the
hanging bracket at the top with bolt (M4 × 35) to
prevent the TV set from falling off unexpectedly.
5. Caution:
1) Never install this product by yourself. Contact a quali
fi
ed operator from the manufacturer; otherwise it may
cause bad results.
2) Do not install this product on the wall with a gradient of over 10 degrees from the perpendicular direction
otherwise the TV set may fall.
3) Install this product as per the installation steps and instructions speci
fi
ed in the user’s manual.
Do not install it by yourself. Please seek assistance from professionals.
4) Before installation, check whether the wall complies with the speci
fi
cations and make sure to
fi
x the TV set with
units supplied by the manufacturer. The wall on which the hanging bracket is installed shall be strong enough
to support the TV set, such as cement wall and brick wall etc. Do not install the hanging bracket to the
fl
abby
wall or the wall which easily becomes
fl
exible, such as sand-structure wall and plasterboard etc. If it is not
possible to measure the intensity of the wall, each hole bored shall be able to bear normal stress of 100N and
shearing stress of 200N.
5) When boring on the wall, use the electric drill and drill bit speci
fi
ed by the manufacturer.
The bored hole shall comply with the speci
fi
cation (speci
fi
ed in the installation steps), otherwise hidden trouble
may occur.
6) Never put the heating articles under the installed TV set, such as heating system, heater, or humidi
fi
er
(otherwise
fi
re or electric shock may occur).
7) Never install the TV set in the places exposed to any sensor, high voltage line or the risk of water leakage.
TV set should be kept away from impact, vibration or any unnecessary electric input otherwise electric shock,
electric conduction and sympathetic vibration may occur.
8) After installing the whole set, do not apply any external force on it to prevent it from falling off accidentally.
9) Before the installation, make sure that the power supply is unconnected. During the installation, wear clean
gloves and take special care to prevent the screen from touching any hard articles or sharp articles.
10) Never install it without tools. To move this product after the installation, please contact the service personnel.
Note:
*
The installation of mounting plate and wall-mounting bracket are optional, please select the best
option at the client’s need for installation.
TV Set’s Front
