6
Setting
Position
Set by inserting
Slotted screwdriver
into the groove
Ex.) Set at No.16 Unit
DSW6
Set No.1 Pin ON
RSW1
Set at "6"
Before shipment. DSW6 and RSW1 are set to "0".
Max.64 units are available to set when all the equipment
to be connected are corresponding to H-LINK II.
Max.16 units when the units corresponding/
non-corresponding to H-LINK II are combined.
Setting
Position
Set by inserting
Slotted screwdriver
into the groove
Ex.) Set at No.5 Cycle
DSW5
Set All Pins OFF
RSW2
Set at "5"
Before shipment. DSW5 and RSW2 are set to "0".
Max.64 cycles are available to set when all the equipment
to be connected are corresponding to H-LINK II.
Max.16 cycles when the units corresponding/
non-corresponding to H-LINK II are combined.
DSW3 must be set corresponding to the
nom heat exchanger Capacity of the AHU
at field site according to chapter 2.2 .
Setting of Dip Switches
3
5
Dip Switches ON PCB1
Dip Switches ON PCB2
PCB layout referring to Fig. in chapter 5.3.
DSW
DSW
DSW
No.1 and No.2 Pins of DSW1
shall be turn off when Multi
Connection application.
