Table continued from last page
Action
Possible causes
Problem
Press and hold the button for
the Auto open option until the
button starts flashing. Wait until
it stops flashing (60 seconds).
Close the door. Check that the
door lock clicks into place and
locks.
Check.
The door is not properly closed.
The dishwasher does not start.
Close the door and wait. After
a while, the dishwasher contin-
ues the program.
You have opened the dishwash-
er to add more dishes while a
program is in progress.
Check the door lock. If it does
not click into place and lock,
open the door.
The door lock has not clicked
into place and locked.
Press and hold the button for
the Auto open option until the
button starts flashing. Wait until
it stops flashing (60 seconds).
Close the door. Check that the
door lock clicks into place and
locks.
Check.
A fuse/circuit breaker has been
tripped.
Check.
The plug is not plugged into the
wall socket.
Check.
The water tap is turned off.
Check.
Overflow/leaks
Turn off the water tap. Pull out
the plug and call the service
department.
A whirring sound (the drainage
pump) is heard from the dish-
washer and does not stop when
the main power switch is turned
off.
Press and hold the main power
switch until the display turns off
if you want to cancel the De-
layed start option. Restart the
dishwasher.
Check that the Delayed start
option has not been selected.
Remove the arms and clean
them.
The spray arms do not rotate.
The dishes are not clean.
Check that the dishes are not
blocking the spray arms.
Clean the spray arms. See
Chapter Care and cleaning.
Spray arm holes or bearings
blocked.
25
