Sound Mode
Standard
Equalizer
Balance
Auto Volume
SPDIF Output
Lip-Sync
5
Off
AC3
0
SOUND
25
Changing the TV Settings
Using the Sound Menu
●
Press [Menu] to open the main menu.
●
Press [
▲
/
▼
] to select Sound, then press [
►
/OK] to
enter the Sound menu.
●
Press [
▲
/
▼
] to select an option.
●
Press [
◄
/
►
] to adjust the option or press [
►
/OK] to
enter the submenu.
●
Press [Menu] to return the previous menu.
●
Press [EXIT] to terminate this menu.
■
Sound Mode - Press [
◄
/
►
] to select between 5 different pre-adjusted sound modes:
Standard, Music, Movie, Speech and User(configurable mode). The User mode preserves your preferred
sound settings after using the Equalizer available under the Sound submenu.
■
Equalizer - Set the User mode of sound.
Press [
◄
/
►
] button to select the audio frequency band between 120HZ, 500HZ, 1.5KHZ, 5KHZ, and 10KHZ.
Press [
▲
/
▼
] button to increase or decrease the volume.
The sound Equalizer can also be easily configured for most frequent situations by pressing the [SOUND]
button on your remote controller. Preset settings are provided for User, Music, Standard and Speech
conditions. Standard mode delivers a flat frequency response, which preserves the natural characteristics of
the original sound. In Music mode the extremes of low and high frequencies are accentuated to enhance
musical instrument reproduction. The opposite effect is accomplished in Speech mode where very low and
high frequencies are attenuated to improve the reproduction and intelligibility of the human voice.
■
Balance - Press [
◄
/
►
] to adjust the volume from the left and right speakers.
■
Auto Volume - Can be used to minimize unwanted variations in sound level, for example, during
advertisement.
■
SPDIF Output - Auto, PCM, AC3 options are available for compatibility with different audio equipment.
■
Lip-Sync - Allows very subtle adjustments between the syncing of sound and vision, You can select 1 to10.
Usually this is set to 5.
