Hisense HK950, Service Manual, Page: 16 / 18

HK950 Service Manual
loaded for the device (for example, the
memory can only run 1000
MHz, but the actual set to
1333MHz) 2) CMOS discharge to load the BIOS default
settings
Disk BOOT failure ,Insert
system disk and press enter Hard disk is not well installed or
hard disk master boot record
error 1) reinstall the hard disk, 2) load the BIOS
default settings to try, 3)load into the DOS with
boot disk, execute the F disk / MBR command
Invalid partition table Invalid partition table 1)load into the DOS with boot disk, implement
of F disk / MBR command 2) re-partition for
the hard disk
Miss operation system Can not find hard disk DOS
boot record Format C drive: Format C / s
Long stay in the "Verifying
DMI pool Data" interface Hard disk master boot record is
corrupted or operating system
problems 1) check the BIOS set up with what equipment
to start the system, and changed to hard disk
boot; 2) see if the BIOS can detect the hard
disk, if not detect, then bad hard disk or hard
disk damage; 3) if the hard disk installation or
Their own have no problem, if no important
data, hard disk can be re-zoning; 4) re-partition
for the hard disk, re-install the operating system
2
）
common error message tips and solutions of LCD
Common fault Cause reason and solution
Black screen
Possible cause
：
mainboard fault, LVDS cable or LED cable faulty
、
LCD faulty
；
solution: Use the substitution method to troubleshoot the relevant parts in the
following order
LVDS or LED cable LCD mainboard
Flower screen ,white
screen , unormal color
Possible cause
：
mainboard fault, LVDS cable or LED cable faulty
、
LCD faulty
solution: Use the substitution method to troubleshoot the relevant parts in the
following order
LVDS cable LCD mainboard
Screen dark
（
no display
、
flickering screen
）
Possible cause
：
mainboard fault, LVDS cable or LED cable faulty
、
LCD faulty
solution: Use the substitution method to troubleshoot the relevant parts in the
following order
LCD cable LCD mainboard
Bright line
Possible cause
：
LCD cable faulty or LCD faulty
solution: replace new LCD or replace new LCD cable
3
）
common error message tips and solutions of Touch panel
Common fault Cause reason and solution
Touch panel not working
good
Possible cause
：
touch controller fault, driver lost; touch screen faulty ,mainboard
faulty, cable faulty or cable bad connection status
solution: Use the substitution method to troubleshoot the relevant parts in the
following order
drivers USB cable touch controller touch screen mainboard
Touch panel no function
Possible cause
：
touch controller fault, driver lost; touch screen faulty ,mainboard
faulty, cable faulty or cable bad connection status
solution: Use the substitution method to troubleshoot the relevant parts in the
following order
drivers USB cable touch controller touch screen mainboard