Figure3.10 Factory information interface of air condition adapter
“MAC ” here is “air conditioning Adapter ID”, it can be copied for use.
Repeat this operation to add all air conditioning adapters into Hi-Dom system
After all adapters are added and saved successfully, click <read time> to read adapter time, and
click <timing> for revision of adapter internal time. if air conditioning adapter is connected to the
computer properly, and “air conditioning adapter ID” is correct, <connection status> will display
<connected>, <timing result> will display <normal>; otherwise it will display <not connected>
and <abnormal>, in this case, please check the IP address settings, cable connections, switch
power supply and air conditioning adapter ID, etc.
3.4.2 Adding meter reading adapters
Enter <Check debugging> -> <electricity and gas meter adapter maintenance> page, as shown in
Figure 3.11, for the configuration process, please refer to air conditioning adapter adding.
Figure 3.11 Metering adapter maintenance interface
※
The bus line number of meter reading is the actual wire number of electricity meters, i.e. the
numbering of the meter reading adapter, NOTE: the meter reading bus number shall not replicate
the bus number of air conditioning.
※
Meter reading adapter ID is the unique identification for meter reading adapter, consisting of a
