Hisense HB200M, User Manual, Page: 3 / 11

4 5
control slowly, and if you experience any discomfort
or ringing in your ears, immediately discontinue use
and consult a physician.
With continued use at high volume, your ears may
become accustomed to the sound level, which may
result in permanent damage to your hearing without
any noticeable discomfort.
using the headset while operating a motor vehicle,
motorcycle, watercraft or bicycle may be dangerous,
and is illegal in some jurisdictions. check your local
laws. use caution while using your headset when
you are engaging in any activity that requires your
full attention. While engaging in any such activity,
removing the headset from your ear area or turning
off your headset will keep you from being distracted,
so as to avoid accident or injury.
3. Keep out of reach of children:
The plastic bags the product and its parts are
wrapped in are not toys for children. The bags
themselves or the many small parts they contain
may cause choking if ingested.
4. Never try to dismantle the product yourself. None of the
internal components can be replaced or repaired by
users.
Only authorized dealers or service centers may open
the product. If any parts of your product require
replacement for any reason, including normal wear
and tear or breakage, contact your dealer.
Avoid exposing the product to rain or other liquids.
dispose of the product according to local standards and
regulations.
do not use the Headset in environments where there is a
danger of ignition of flammable gases.
The headset is equipped with a magnetic pendant.
The magnet in the pendant can harm other
electronic devices. handle the magnetic pendant
with care and keep away from electronic devices
such as speakers, Tv, lcd screens Etc.
Introducing the HB200M
Microphone
1.
Multi-Function Button (MFB)
2.
Pairing Button – press and hold for 5 sec to put
•
headset into pairing mode
Answer/End Button
•
Press to turn headset on (blue and red lights flash
•
for 1sec)
Press and hold to turn headset off (blue and red
•
lights flash for 1sec and then power will shut down)
Press to answer or end a call
•
lEd light
3.
charging Socket
4.