10
4.
Remove the screws from
the lower hinge and refit
them on the opposite side.
(The unit may need to be
tilted to the side for this)
Take note to position the
screws and the pin on the
outer holes of the hinge.
Remove the metal piece
on the bottom of the door
to the opposite side.
5.
Position the hinge plate
on the top of the unit, on
the opposite side, not
tightening the screws
completely.
6.
Fit the door to the lower
hinge and place the pin in
the upper hole of the door.
7.
Lift the facia panel and
position the pin into the
hole of the facia panel and
the hinge plate.
8.
Tighten the pin nut above
the hinge plate.
9.
Tighten the remaining
screws of the hinge
plate.Make sure the door
is aligned properly, then
tighten the hinge plate on
the opposite side.
10.
Replace the top cover
panel, and tighten 3
screws on the back and
two screws on the top.