11
A. Garden hose
B. Drain hose connector
A
B
the unit.
3. Attach a garden hose to the drain hose
connector on the back of the dehumidifier.
Securely attach the hose ensure there is no
water leak.
5. Reinstall bucket.
For models with pump :
1. Turn off the dehumidifier and unplug the power
supply cord.
2. Uncover the connector cover on the back of
A
B
A. Garden hose
B. Drain hose connector
C. Connector cover
C
should at lest
.
The hose should not be kinked or pinched.
5.5" lower than the hose connector
outlet of the hose
Connector
level
More than 5.5"
Without Pump
function model
With Pump
function model
Option 3 PUMP-Drain (for models with pump only)
NOTE:
You must connect the drain hose to drain
hose connector before pressing Pump button.
If the pump does not function properly, see
“Trouble shooting” for direction.
1. To connect the drain hose to the unit,uncover
This feature can help to pump water horizontally
or vertically with a 16 feet (487.68cm) hose
included. You can also pump water to a floor drain,
out a window or anywhere you think suitable.
NOTE:
■ To use the bucket without the garden hose,
simply remove the garden hose,
ump ,you may also cover the
connector cover
■ The bucket must be installed and properly
aligned for the dehumidifier to operate .
then reinstall
bucket.
■
For models with p
after remove the garden hose.
Drain hose
Side hole
2. Insert the drain hose into the Drain hose
connector and ensure the hose is plugged to
the bottom of the connector.
Connector level
-
the connector cover on the side of the unit,and
pass the hose through the side hole.
Connector cover
Drain hose connector
Drain hose
Take care not to injure hands
while connecting the hose.
NOTE:
Place the other end of garden hose into a floor
drain. Check to see that the hose lies flat and is
in the drain. Make sure all the parts of the hose
is on a lower level than the hose connector on
the dehumidifier.Also ,the outlet of the hose
-
