Hisense Chill RC07N1CBD1, User Manual, Page: 16 / 24

Note
:
When filling up the top vend rack
level
,
if the containers have a relatively
large external diameter
,
you are advised
not to place any container at position
number 6 to improve dispensing
performance
.
3.Repeat the above steps to fill up other
vend rack levels with beverages
4.Close the front vend door when stocking
is complete
.
5.Confirm dispensing operation by
pressing the corresponding selection
button
(
s
)
of the vend rack levels refilled
.
Notes
:
The beverage containers used in this
appliance should be cylindrical or
approximately cylindrical in shape
.
If the beverage containers are very soft
,
abnormal dispensing may result
.
If the beverage containers are very soft
(
plastic bottle
,
for example
),
the last
bottle may not dispense normally
.
Keep
each vend rack level fully loaded to
enhance dispensing performance
.
Please do not mix different sizes or
shapes of containers on same vend rack
level
,
for best dispensing performance
.
Its recommended to load glass bottles in
vend rack level c and d
,
to reduce the
likelihood of breakage in case a bottle was
dropped
.
For beverages with high CO2(carbon
dioxide) content
,
such as soft drinks and
beer, its recommended to wait 10 to 15
seconds after dispensing before opening
the containers to avoid overflow
.
16
It is recommended that the beverage
with higher CO2(carbon dioxide)
content (such as beer with much
bubbles, cola, etc) should be loaded
on the two lower levels (c or d).