Hisense BabySense V35US, User Manual

Page: 7 / 18

light source or direct sunlight. Avoid installing the
camera where there are thick walls or obstruc�ons
between the camera and the monitor.
• To use your parent unit and baby unit together, you
must be able to establish a radio link between them;
the range may be affected by environmental
condi�ons/obstacles (See more details in Trouble-
shoo�ng Sec�on on page 11 - “Interference or poor
recep�on”)
4 Opera�ng the Monitor
4.1 Pairing the Baby Unit (Camera) with
the Parent Unit
To pair a new/addi�onal Baby Unit, follow the
procedure below:
NOTE:
Before you begin pairing, be sure to have the
Baby and Parent Units side by side and turned on.
• Press the
MENU/OK
bu�on on your Parent Unit
and the menu screen will pop up.
• Press the
LEFT
bu�on
or
RIGHT
bu�on un�l
the
PAIR
icon is highlighted in red.
• Then press the
MENU/OK
bu�on
and a
secondary menu with camera op�ons will pop up.
• Press the
LEFT
bu�on
or
RIGHT
bu�on
to
select the desired Baby Unit to pair and press the
MENU/OK
bu�on bu�on to start searching for a
Baby Unit to pair.
• The chosen Baby Unit will start blinking. Press and
hold the
PAIR
bu�on
(10)
in the back of Baby Unit
un�l the connec�on is established.
• Once paired, an image from the paired Baby Unit will
display on the screen.
• Press the
EXIT
bu�on to exit the menu.
• If unsuccessful, please repeat above steps.
7