English
2
Installing the Stand
Installing the Stand
CAUTION
Be sure to disconnect the A/C power cord before installing a stand or Wall-Mount
brackets.
The LED display is very fragile, and must be protected at all times when installing
the base stand. Be sure that no hard or sharp object, or anything that could scratch
or damage the LED display, comes into contact with it. DO NOT exert pressure on
the front of the TV at any time because the screen could crack.
To attach the left and right leg that forms the stand:
1. Unpack the carton and remove the two
side cushions, take the TV out of the
carton together with the top cushion,
then put them on the horizontal table
with the LCD downward.
Attention: The way of TV's taking-out is
shown on the label which is pasted on
the top cushion.
3. Take the curved base stand out of the
top cushion, secure it to the TV with the
4 provided screws in the accessory bag.
Attention: It is suggested to be done
with two persons.
2.
Remove the screws of the side covers
as shown in figure, and then take off
the two covers.
4. Take the two rear base stands out of the
top cushion, secure them to the TV with the
4 provided screws in the accessory bag.
Cover
Cover
M4×12
M4×12
M4×12
Top Cushion
Rear Stand
Base Stand
M4×12
