2
Installing the Stand
Installing the Stand or Wall Mount Bracket
CAUTION
Be sure to disconnect the AC power cord before removing a base stand or installing
wall mount brackets.
The display on your TV is fragile. Make sure the TV screen is not scratched or
damaged by hard objects or from pressure.
After the installation is complete, make sure the TV is steady on a table or firmly
attached to a wall mount, before removing all protective film, if any.
1. Carefully place your TV face-down on a soft, flat surface to prevent damage to the
TV or scratching to the screen.
Follow the illustrations and instructions below to complete the installation steps:
2. Take out the Base Stand Part A
and open it from top, then separate
it into Part a1 and Part a2.
Part A
Part a1
Part a2
3. Put Part a1 onto the back cover
of the TV.
Part a1
Part a1
4. Secure Part a1 with 4 screws (M5×12)
onto the back cover of the TV.
Part a1
4 Screws:
M5×12
For 65"
Summary of Contents for 65U9HAU
Page 1: ...Bar code ...
Page 4: ...A Declaration ...
