4
Installing the Stand or Wall Mount Bracket
For
85"
ATTENTION
Follow the illustrations and textual instructions below
to complete the stand
installation steps.
Two people and above are required.
1. First follow the instructions on the carbon box. Open the box, take out the base
stands and then take out the upper cushion, left cushion and right cushion. Make
sure the side of left and right cushion is aligned with the gap of upper cushion(to
avoid the interference between cushions and the base stand when installing it), just
as the picture shows below.
2. Two people stand on each side of the television. Hold the back side of TV with one
hand and grasp the buckle on lower box with the other hand. Place the TV on the
cushions with the screen face upward. Make the handle touch upper cushion, back
cover touch the left and right cushions. When finished, take off the lower box.
3. Secure the Base Stand to the TV with the 6 screws in the accessory bag tightly.
Then stand the TV up.
Note:
If your table is long enough to place the TV on top of, then insert the base stands into
the screw holes ‘A’ that are shown in the illustration. If your table is NOT long enough, then
insert the base stand into the screw holes ‘B’ that are shown in the illustration. Note that
these two installation methods types cannot be mixed.
left and right
cushion
upper cushion
align
align
left and right
cushion
handle
upper cushion
about 50 mm
screen face upward
Summary of Contents for 55U7HAU
Page 1: ...Bar code ...
Page 4: ...A Declaration ...
